Installation & Assembly
Support Strips
This step is to ensure that the bottom of the sink has enough support.
Construct a wood support frame to t inside the cabinet opening. Allow adequate
clearance for the water supply lines and drainage system.
The recommended support frame design is shown in the illustration on the left,
which consists of four vertical supporting strips, two horizontal supporting strips
and one supporting board. Due to the variety of installations possible with this sink,
your installer may suggest a different support frame design.
IMPORTANT: Base cabinet and wood support frame are essential for proper
installation. The weight of the sink when full is approximately 300 lbs. Base cabinet
and support frame must sufciently support this weight.
Support Board
Using two people, carefully place the sink in place. Verify that
the sink can fit in the cabinet opening and rest properly on the
supporting system. Make a small adjustment to t as necessary.
Verify the overall appearance and check for levelness to ensure
correct drainage.
IMPORTANT: Risk of personal injury or product
damage. Handle with care. The product can break,
chip, cause injury or product damage.
soleilsinks.com