Owner Manual
Measure the size of the sink, including the front apron. Cut the face of the
cabinet to allow the sink to slide in.
Use painter’s tape for marking and cutting purpose to protect the cabinet
and sink from damage.
IMPORTANT:
Due to the dimensional variation from the fireclay manufacturing
process, Soleil Sinks does not offer the cutout template for fireclay sinks.
It is essential that prior to installation, you discuss with your installer and
agree on the final appearance. Cabinet should NOT be cut or fabricated
without the sink.
Measure the size of the sink, including the front apron. Cut the countertop
to allow the sink to slide in.
RECOMMENDED TOOLS
FIRECLAY SINK INSTALLATION INSTRUCTIONS
STEP1: BASE CABINET PREPARATION
STEP2: COUNTERTOP PREPARATION
□ Tape Measure
□ Safety Glasses
□ Painter’s Tape
□ Level
□ Ear Protecon
□ Hacksaw/Jigsaw
□ Pencil (Not permanent marker)
□ Shims or Cabinet Fillers
□ Denatured Alcohol
□ Clamps
□ Construcon Adhesive
□ Silicone Adhesive Sealant
□ Support Framing Material (1 ¼” (32mm) Max Thickness)
□ Screws (recommended by countertop manufacturer)
Outline for Apron Front Sink Cutout
Outline for Apron Front Sink Cutout