Installation Instruction Single Handle Lavatory Faucet 1
*Specify Finish 1 2 3 4 5 10 6 7 8 9 PART PIEZA 1 2 3 4 5 6 7 8 9 10 DESCRIPTION DESCRIPCIÓN Handle assembly / Ensamblaje de la llave Cap / Tapa Bonnet nut / Tuerca del bonete Cartridge & Screw / Cartucho y Tornillo Deck plate / Placa de la cubierta Gasket / Junta Flange / Brida Washer / Arandela Lock nut / Tuerca de bloqueo Press pop-up assembly / Presiona el ensamblaje emergente 2 PART# NÚM.
Product Dimension Drawing 5 29/32" [150.4mm] 5 7/8" [149.6mm] 4 27/32" [122.9mm] 6 7/16" [163.4mm] 3 3/8" [86.0mm] 2 1/2" [63.2mm] 2 5/32" [55.
1a 1b 3 5 3 4 4 2 2 1 1 Shut off the water supply. Remove the preassembled lock nut (1) and washer (2) from the new faucet. Before installation, ensure that the flange (3) is placed on the bottom of the new faucet. Place the faucet through the mounting holes in the sink until the faucet sets on top of the sink. Secure the faucet to the sink using the washer (2) and lock nut (1) provided. Ensure the washer (2) and hoses (4) are no interference. Shut off the water supply.
4 1 2 3 1 2 Slide the nut (1) over the tail pipe (2). Place the washer (3) into the nut and tighten. Do not overtighten. Making the water supply connections: Thread the nut (1) on the supply line onto the outlet of the water supply valve (2) and tighten with a wrench. Do not overtighten. NOTE: The hot side inlet tube is indicated by a label. Avoid twisting wires together or placing the wires close to each other and damaging. Desliza la tuerca (1) sobre el tubo de extensión (2).
Cleaning Recommendations Today, modern sanitary and kitchen tapware, showers, accessories, washstands, tubs and consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and product failures and not void Warranty please follow the below guideline. •Only use cleaning material which is explicitly provided for this type of application.
Limited Lifetime Faucet Warranty LIMITED CONSUMER WARRANTY This product has been manufactured and tested to the highest quality standards. This warranty is limited to products that are purchased by a consumer in the United States or Canada after June 1, 2017, and installed in either the United States or in Canada. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. This warranty is non-transferable.
