Installation & Assembly

PAGE 2
Contact Soleil Sinks at [phone] or visit www.soleilsinks.com. Copyright ©2017, Soleil Sink Company Inc. All rights reserved.
Installation Instructions
Top Mount Porcelain Sink
1. Unpack the new sink and check the contents of the materials supplied: sink, and cutout template.
2. Place the sink upside down in desired position on the countertop and trace completely around the edge of
the sink.
3. Use the cutout template as reference. Position it to the proper place that in between the sink edge line
and trace around the edge of the template.
4. Drill a pilot hole in all four corners of the inside line. Use a saber saw or jig saw to cut on the inside line.
(Note: Place a support underneath the cutout portion of the countertop to prevent it from falling during
cutting.)
5. Apply silicone sealant (not included) around the cutout on the countertop surface.
6. Carefully lower the sink into the cutout in the countertop.
7. Wipe away any excess sealant with a rag. (Note: It is recommended that keep sealant dry for several
hours before install the drain and other supplement in case of moving the sink.)