Installation Instruction Pull Down Kitchen Faucet Model: 7636 1
*Specify Finish 2 1 3 4 5 6 7 8 9 23 10 24 20 21 22 23 11 15 16 17 26 12 25 18 19 13 14 PART PIÈCE DESCRIPTION DESCRIPTION PART# N ° DE PIECE 1 2 3 Spray head and Hose / Cabezal rociador y manguera O-ring / Cartucho y tornillo Wearable ring / Bonete RP38241* RP60071 RP70380 4 Cartridge / Cartucho RP20005 5 6 7 8 9 Bonnet / Bonete Cap /Tapa Screw / Dispensador de jabón RP70394 RP80028* RP50015 RP13390* RP50002 10 Flange & Washer / Brida y arandela Escutcheon / Placa protectora B
Product Dimension Drawing 270.8mm [10.7in] 255.6mm [10.1in] 215.7mm [8.5in] 45° 45° 23° 375.1mm [14.8in] 195.6mm [7.7in] 15° MAX:59.3mm [2.3in] 66.6mm [2.6in] 203.2mm [8.0in] 801mm [31.5in] 9/16-27UNS-2B 115.6mm [4.5in] 71.7mm [2.8in] 61.0mm [2.4in] 50.8mm [2.
2a 1 1 2 This faucet can be installed as 4 hole installation with the escutcheon or as 2 hole installation with flange. If using flange, begin with step 2a. If using escutcheon, begin with step 3a.step 3b. Optional Flange Installation Before installation, ensure that the flange (1) is placed on the bottom of the new faucet assembly (2). Insert the faucet body through the hole in the sink.
3c 4 1 2 3 4 Optional Escutcheon Installation Insert faucet body through the hole in escutcheon. Install the plastic washer (1), and metal washer (2) onto the threaded mounting shank. Thread the nut (3) onto the mounting shank. Lock the nut (3) into position by tightening the screws (4). Do not overtighten. Instalación de la Placa Ornamental Opcional Inserte el cuerpo del grifo en el orificio de la placa ornamental.
9 8 Thread the nut (1) on the supply line onto the outlet of the water supply valve (2) and tighten with a wrench. Do not overtighten. NOTE: The hot side inlet tube is indicated by a label. Avoid twisting wires together or placing the wires close to each other and damaging. Important: After installation is completed, turn on hot and cold water supplies. Check for leaks. Pull the hose assembly out of the spout and remove the spray head by unscrewing it from the hose counterclockwise.
Cleaning Recommendations Today, modern sanitary and kitchen tapware, showers, accessories, washstands, tubs and consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and product failures and not void Warranty please follow the below guideline. •Only use cleaning material which is explicitly provided for this type of application.
Warranty conditions General LIMITED CONSUMER Warranty is limited to products that are purchased by a consumer in the United States or Canada after November 1, 2015, and installed in either the United States or in Canada. WHO IS COVERED BY THE WARRANTY This warranty extends to the original purchaser only. This warranty is non-transferable.
