User's Manual

Fig 4-15: BTS Calibration Request
A dialogue box for calibration request pops up. Select calibration type between
“Complete calibration” and “Express calibration”, then click “OK” and the calibration is
successful.
Fig 4-16: Calibration action request window
After calibration, click calibration result to view whether the result is saved and whether
the calibration result is correct. If the result is not saved, "No calibration result" will be
displayed and if the calibration is not successful, the words will be displayed in red.
Meanwhile, please check calibration time to make sure that the calibration result is from
current calibration.