User's Manual

 C - This command can be used to change current L2 boot parameters. Once this
command is selected, a detailed option list will be displayed. Modify and overwrite it.
When all options are modified, the system will return to [VxWorks Boot]: message.
During these processes, press [Enter] to accept current parameters value or input
new parameters value and press [Enter] to confirm. Besides, input “.” and press
[Enter] to clear current value of this entry and restore it to default. If any error occurs,
process “-(hyphen)” and [Enter] to return to previous option. Or you can continue this
erroneous entry and modify it when returning to [VxWorks Boot]: command line.
 d - display memory usage; the user-defined base station memory to be displayed can
be viewed here. This operation can only be conducted by Solectek certified technical
support engineer.
 m - modify memory. This option allows the user to change allocation of base station
memory as per the user’s requests. This operation can only be conducted by
Solectek certified technical support engineer.
 f - fill memory. This option allows changing BTS memory with a set mode. This
operation can only be conducted by Solectek certified technical support engineer.
 t - fill memory. This option allows changing BTS memory with a set mode from other
memory area. This operation can only be conducted by Solectek certified technical
support engineer.
Input “c” to configure L3.
[VxWorks Boot]: c
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : mv0 ：Boot BTS from ftp server
processor number : 0
host name : hy ：host username
file name : l3_image ：filename of L3 startup
inet on ethernet (e) : 192.168.17.160:ffffff00 ：IP and subnet mask
of L3
inet on backplane (b): 10.0.0.1 ：IP of L3’s BP
host inet (h) : 192.168.11.199 ：IP of ftp server
gateway inet (g) : 192.168.17.1 ：IP of L3’s gateway
user (u) : emstest ：username of ftp server
ftp password (pw) (blank = use rsh): emstest ：FTP password
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) :
[VxWorks Boot]:
Input “C” to configure L2.
[VxWorks Boot]: C
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : mv0 ：Boot BTS from ftp server
processor number : 0
host name : hy ：host username
file name : l2_image.bin ：filename of L2 startup
inet on ethernet (e) : 192.168.17.161:ffffff00 ：IP and subnet
mask of L2
inet on backplane (b): 10.0.0.2 ：IP of L2’s BP
host inet (h) : 192.168.11.199 ：IP of ftp server