User's Manual

Start EMS server and client in EMS server computer. Make sure that EMS server and
client application are installed and configured properly
Enter EMS SERVER IP and port in IE address bar to enter EMS client GUI interface
(refer to the EMS server user’s guide for details). Input user name and password in EMS
client login screen to start the process.
3.2.2 FTP Server Configuration
Add the base station load program to the server with the FTP server and make sure that
there is a link between the FTP server, the EMS server and the BTS as shown in Fig 3-1.
Start installed FTP server software, such as serv-u, sonicftp, etc. Add user after staring
and specify the path for user to read as the path where Load programs are located, for
example, user name: emstest, path: d:\release0.3.2.1.
Fig 3-1: Window to enable addition of users