User Manual

60
route R
show
route
Show IP route table
rssi R
show
rssi
Show Local Recv Signal
Strength
savecfg W
savecfg
Save configuration to
permanent memory
serialnum R
show
serialnum
Show system serial number
set R
set ?
Set ? for commands
show R
show
Show commands
snmp RW
enabled
public – for all
strings
192.168.1.1 for
trap manager
set snmp enable=[yes|no]
set snmp [read-community|rc]=[abcdef]
set snmp [trap-community|tc]=[abcdef]
set snmp [trap-manager|tm]=[a.b.c.d]
show snmp
Set SNMP configuration
parameters
status R
status
Show system status
streams RW 1 show streams
set streams [1 | 2]
Show / Set the number of
MIMO data streams. Limited
to 1 for Access 50.
sysmode RW retains sysmode show sysmode
set sysmode [MULTIPOINT_MASTER |
MULTIPOINT_SLAVE]
Show / Set the MULTIPOINT
operating mode
tz RW “+00:00”
tz
[+hh:mm |
-
hh:mm]
Set/Show time zone
updatesw W updatesw [options] [swver]
Options: -v -verbose output
-b -update uboot
-k -update kernel
-r -update rootfs
-h -use http
-i -ignore existing
configuration
-f -force the update
Download and install new
system software
upload W
upload
config [remotefile]
upload syslog [remotefile]
Upload files to remote server
uptime R
uptime
Display current system
uptime
version R
version
Display current software