User Manual

56
Appendix B: Telnet Commands
Command R/W Default Usage Description
acl RW enabled
acl
add [mac] [client
-
name]
acl del [mac]
acl show
acl [enable | disable]
Master unit only
Add/Delete/Show entries in
the RF access control list.
Enable or Disable acl
function
arp RW arp [OPTION]
Options:
-a Display (all) hosts
-s Set new ARP entry
-d Delete a specified entry
-v Verbose
-n Don't resolve names
-i IF Network interface
-D Read [hwaddr] from
given device
-A, -p AF Protocol family
Manipulate the system ARP
cache
audioalign RW 1800 secs set audioalign [duration_secs]
show audioalign
Set/show Audio Antenna
Alignment duration in
seconds. Duration 0
disables alignment tone.
bridge R
show
bridge
Show Bridge Table
bw RW 20
set
bw
[20 | 40]
show bw
Set RF bandwidth in MHz
chanplan R
Varies by Model,
Region
show chanplan Show channel plan.
cfgdiff R cfgdiff [boot]
Shows differences between
current configuration and
default
clear W
clear
Clears all Ethernet & RF
Port counters
clearevtlog W
clearevtlog
Clear event log
clientcfg R/W clientcfg <mac> [--name <name>] [--
dlmod <dlmod>] [--dlstr <dlstr>] [--
Show status of and make
changes to configured