User Manual

49
7. On the Radio management GUI, navigate to Management -> Upgrade to access the
Upgrade screen (see sample below).
8. Enter the FTP Server IP Address, Username and Password information as requested.
9. Enter the three digit software version to be loaded onto the Radio. Format will be x.y.0
(e.g. – 1.4.0).
10. Press the ‘Upgrade’ button to begin the file transfer process.
11. Once complete, the unit must be rebooted for the upgrade to take effect.
WARNING - Do not power down or unplug the unit during the upgrade
process. Software image corruption may occur if power is disrupted
during the flash write process.
If the upgrade fails to complete, or times out: