User Manual

24
8. Access Control
In order to match up with the Slave unit, the Master unit must be configured properly for the
Slave unit. Navigate to Configuration -> ACL on the Master unit to access the following screen:
Access Control List (ACL) – enabling the ACL means that the Master unit only accepts Slave
unit whose MAC addresses are registered at the Master unit. Disabling the ACL allows any
Slave unit that operates with the same RF parameters as the Master unit.
In order to add a new Slave unit, enter the MAC address and the client name (name of your
choice) and click the ADD button.
9. Security
Navigate to Configuration -> Security to access the Security Configuration screen a shown
below.