User's Manual

21
tz Admin RW “+00:00” tz [+hh:mm | -hh:mm] Set/Show time zone
updatesw Admin W
updatesw [options] [swver]
Options: -v -verbose output
-b -update uboot
-k -update kernel
-r -update rootfs
-h -use http
-i -ignore existing configuration
-f -force the update
Download and install new system software
upload Admin W upload [[config | syslog] [<localfile> [<remotefile>]]] Upload files to remote server
uptime Admin R
uptime
Display current system uptime
version Admin R
version
Display current software version
vlan Admin RW disabled vlan [enable | disable] Enable/Disable management via VLAN
vlanid Admin RW 1 set vlanid [vlan id] show vlanid Set VLAN ID for management channel
ethcfg Network RW auto set ethcfg [auto-neg | 10baseT-HD | 10baseT-FD |
100baseTx-HD | 100baseTx-FD]
show ethcfg
Set ethernet speed and duplex
arp Network RW
arp [OPTION]
Options:
-a Display (all) hosts
-s Set new ARP entry
-d Delete a specified entry
-v Verbose
-n Don't resolve names
-i IF Network interface
-D Read [hwaddr] from given device
-A, -p AF Protocol family
Manipulate the system ARP cache
bridge Network R show bridge Show Bridge Table
clear Network W
clear
Clears all Ethernet & RF Port counters
gwaddr Network RW 192.168.1.1 set gwaddr [a.b.c.d] show gwaddr Set default gateway IP address
ipaddr Network RW 192.168.1.100 set ipaddr [a.b.c.d] show ipaddr Set IP address
ipmask Network RW 255.255.255.0 set ipmask [a.b.c.d] show ipmask Set IP netmask
macaddrs Network R show macaddrs Show Ethernet and RF MAC addresses
route Network R show route Show IP route table
bw RF RW 20 set bw [20 | 40] show bw Set RF bandwidth in MHz
chanplan RF R Region
specific
set chanplan [channel_plan] Show current channel plan.
counters RF R show counters Show RF statistics
distance RF RW 16 set distance [miles] show distance Set distance in miles
essid RF RW MY_ESSID_1 set essid [essid] show essid Set RF ESSID of wireless network