User Manual

• A SkyWay 5000 Series base unit (5600 or 5700) for a live testing of the
multipoint wireless network.
2. System Configuration
A. CONNECTING THE SKYWAY UNIT FOR CONFIGURATION
The following diagram explains the connection so that you can access the user
interface for configuration
• Power on your SKYWAY 5000:
1. Connect your SKYWAY and POE injector with an Ethernet cable.
2. Connect your PC to the POE injector using (a) crossover Ethernet
cable or (b) straight cable and a hub/switch.
3. Power on the POE injector using the supplied AC to 24V DC
adapter.
B. SET UP YOUR COMPUTER’S TCP/IP PROPERTIES
Open networking properties in your Windows OS. Find the TCP/IP setup window
of your wired Ethernet adapter. The details on how to set the IP address of
your computer’s Ethernet adapter are different, depending on Windows versions
(95/95/2000/Me/XP). Please consult your Windows OS documentation. Shown
below is the Windows 2000 TCP/IP Properties. Set the IP addresses to the
following values.
Ethernet’s IP Address: 192.168.0.2
Subnet Mask: 255.255.255.0