User's Manual

26
this list or having a gain greater than 29 dBi are strictly prohibited for
use with this device. The required antenna impedance is 50 ohms.
• Pulse RO5810NM 5.8 GHz Omni
• Pulse R04910NM4.9 GHz Omni
• ARC Wireless Solutions 4.940-5.875GHz 24/23dBi Dual
Polarization Panel Antenna
• Laird HD Series High Performance Dish Antenna HDDA5W-
29-DP - 29dBi dual polarity (H and V)
The use of the last two Antennas above shall be restricted to Point-to-
Point use only.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Information contained in this document is subject to change without
notice. Solectek Corporation shall not be liable for errors contained
herein or for incidental or consequential damage in connection with the
furnishing, performance, or use of this material. Reproduction,
adaptation, or translation without prior written permission is
prohibited, except as allowed under the copyright laws.
Solectek Corporation makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties or
merchantability and fitness for a particular purpose.
NOTE: Changes or modifications not expressly approved by Solectek
could void the user’s authority to operate the equipment.
SkyWay and Solectek are registered trademarks of Solectek Corporation.
Windows is the trademark of Microsoft Corp.
Copyright 2008-2010, Solectek Corp. All rights reserved.