User's Manual

21
Appendix B: Telnet Commands
Command R/W Default Usage Description
acl RW enabled acl [add | del | list] [aa:bb:cc:dd:ee:ff] [client-name]
acl [enable | disable]
Master only
Add/Delete/List entries in the RF access
control list.
Enable or Disable acl function
arp RW
arp [OPTION]
Options:
-a Display (all) hosts
-s Set new ARP entry
-d Delete a specified entry
-v Verbose
-n Don't resolve names
-i IF Network interface
-D Read [hwaddr] from given device
-A, -p AF Protocol family
Manipulate the system ARP cache
audioalign RW 1800 secs set audioalign [duration_secs]
show audioalign
Set/show Audio Antenna Alignment
duration in seconds. Duration 0 disables
alignment tone.
bridge R show bridge Show Bridge Table
bw RW 20 set bw [20 | 40] show bw Set RF bandwidth in MHz
chanplan R Varies by Model,
Region
show chanplan Show channel plan.
cfgdiff R cfgdiff [boot] Shows differences between current
configuration and default
clear W
clear
Clears all Ethernet & RF Port counters
clearevtlog W
clearevtlog
Clear event log
counters R show counters Show RF statistics
date RW date [-u]... [MMDDhhmmYYYY
Options:
-u Apply the UTC time zone offset to the date
Display or set current date
default W
default
Restores system to factory defaults