User's Manual

14. Telnet

Using the radio’s IP address, the system can be managed using a Telnet

connection.

Access login and password are the same for a Telnet session as for the HTTP

GUI.

Sessions can be initiated from both the Ethernet and RF side of the Network,

and multiple sessions are permitted.

Note: the ‘savecfg’ command must be used to save Telnet configuration

changes to non-volatile memory.

See Appendix B for a complete Telnet command set, syntax and usage.

15. SNMP

The SkyWay management system includes ‘get’ support for SNMP v2c via

standard and private MIB tables.

Navigate to Management -> SNMP to access the SNMP Configuration screen:

SNMP Enable: For security purposes, the SNMP engine can be disabled, if not

used.

Community Names and Trap Manager IP Address fields should be entered

based on the configuration of your SNMP Manager software.

The private MIB (P/N 1539901) is available on Solectek’s Support website or

from Solectek Technical Support personnel.

For further information about SNMP management, the following documents

available on Solectek’s Support Website may be helpful:

• SkyWay Excel SNMP Usage Guide (1553101)

• SNMP Objects for Monitoring SkyWay Excel (1559201)

Additional Notes:

(a) SNMP community fields are case sensitive with no spaces allowed. Fields

must be between 1 and 64 characters in length.

(b) Legal characters are: all alphanumerics, plus the following symbols:

@ (at sign) - (dash) . (period) ‘ (tick) _ (underscore)