User's Manual

• User Name: User name used to login onto the upgrade FTP server. For

convenience, you may want to use anonymous login.

• User Password: Password used to login onto the upgrade FTP server.

• Image File Name: The name of the binary file to be loaded onto your

SKYWAY 4000 unit. This file should have an *.img extension and the full

filename, including extension, should be entered into this field.

• Image File Directory: Directory path to find the software upgrade file on

the FTP server.

NOTE: This path name is relative to the root path of the FTP server.

After all information has been entered correctly, click on the Upgrade button.

The upgrade should take less than a minute, and the unit will automatically

reboot once the upgrade is complete.

REMINDER: Do not power down or unplug the unit during the upgrade

process.

13. System Reboot

To reboot the system from the Web Interface:

• Click on the Reboot menu option under the Advanced parent menu of the

Navigation Toolbar. The following screen will appear:

Click on the Reboot button to reset/reboot. The reboot process will take

approximately 30 seconds. Once the rebooting is done, you can use the Click

Here button below to access the user interface again.