User's Manual

You can delete a static route by checking the box to the right of the static route

and clicking the Delete button.

• Check All – You can check all boxes by clicking this button. This is

usually used when you want to delete all static routes. Be careful in

using this button, as it could erase all of your routing information.

• Clear All – Clicking this button will uncheck all boxes.

• Delete - Both Delete buttons on the screen achieve the same result:

delete all route entries with boxes to the right of entries checked.

RIP (Router Information Protocol)

Go to the Configuration –> RIP menu option to activate the RIP routing

The following describes the menu items in the RIP Configuration screen:

• Multicast

Though typically not implemented across the public Internet, Multicast

for IP support is possible across SkyWay 4000 when routing with RIP

v.2 is enabled. SkyWay 4000 can be configured to use the multicast

address 224.0.0.9 to proliferate route updates, thus reducing

broadcasts of route updates.

• Update Interval