User's Guide

Understanding the Menu Structure
13
Understanding the Menu Structure
The SkyWay screens are organized by function, and are hierarchically numbered. The
Run Time Main Menu is shown below:
The Configuration menu, option 1, shows you a list of 5 options. For example, 1.1
System Configuration, 1.2 Port Configuration, etc. For a complete list of the screens in
the menu tree, refer to “Appendix A: Run-time Menu Tree” on page 175, and “BIOS
M e n u Tr e e S u m m a r y Ta b l e ” o n p a g e 1 7 9 .
For information on the Bios Application, see
Navigating Through Menus and Screens
Use the keys in the following table to navigate through the menus:
To …
To …To …
To … Press This Key…
Press This Key…Press This Key…
Press This Key…
Move down or up through menu
options
Down- or Up-Arrow
Move through list of field entries
Right- or Left-Arrow or space bar
Select an item or edit a field
Enter
Go up one menu level
\ (Blackslash)
Move between fields
Tab, Up- or Down-Arrow
Enter a command
.(dot) followed by the command. (see “Dot
Commands” on page 14)
Go directly to a particular screen if
you know the screen number
From the Main Menu, enter the screen num-
ber. From other screens where commands are
available, press
. (dot), then type the number
of the screen. The screen title appears above
the number. If this is the screen you want,
press Enter.