User's Guide

RF-DLC Screens
147
Checking the RF Signal Status
You can check the RF signal status for the RF Base Sub Ports.
2.5.4 RF Signal Status
Field Name MIB Comments
Port Number [swSignalStatusIndex]
The port number of the unit for which you are viewing this status.
Signal Level (-dBm) [swSignalStatusSig-
nalLevel]]
The detected signal level for this port. For example, a value of 55 is -55 dBm.
Noise Level (-dBm) [swSignalStatus-
NoiseLevel]
The detected noise level for this port. For example, a value of 85 is -85 dBm. A
value of 95 is no noise detected.
Signal/Noise (dB) [swSignalStatusSignal-
To N o i s e ]
The signal to noise ratio. The value indicates Noise Level minus Signal Level.
2.5.4. RF-DLC Signal Status Record 0 of 0
Signal Noise
Port Level (-dBm) Level (-dBm) Signal/Noise (dB) Rcv Timeouts/Sec
---- ------------ ------------ ----------------- ----------------
256 95 95 0 0
\ - return to menu . - commands TAB - next available field ENTER - edit