User's Guide

106
Te s t To R u n
Parameters that
can be configured
Comments
Continuous Burst Trans-
mit
Test Timeout, Number
of Bursts
This test is similar to
Burst Frame Ping Pong
Mode, except that the
sub station does not
reply. The base station
sends the number of
bursts, times out,
repeats. (There are 7
frames in a burst).
Continuous Single
Frame Transmit
Test Timeout, Number
of Frames, Frame Length
This test is similar to Sin-
gle Frame Ping Pong
Mode, except the sub
station does not reply.
The base station sends
the number of frames to
the sub station continu-
ously until the timeout
occurs.
Single Frame Ping Pong
Mode
Test Timeout, Number
of Frames, Frame Length
The base station sends
out the frames, one at a
time, and the substation
returns them one at a
time.This test can be
used as a protocol tester
to send out all types of
RF-DLC frames.
Static Size Ping Pong
Mode
Test Timeout, Number
of Frames, Frame Length
The base station sends
the number of frames of
the size given, the sub
station receives them
and performs a CRC,
then returns the same
number of frames of the
same length.
Field Name MIB
Settings (default in
bold)