User's Guide

86
Jabber (10Base-T) [swEtherTransCfgJabber] • Enabled
EnabledEnabled
Enabled
• Disabled
Disables transmit and loopback on the Ethernet transceiver if the MA transmission
exceeds the jabber timer. Valid only for 10Base-T.
Auto Negotiate [swEtherTransCfgAuto-
Negotiation]
•
••
•Enabled
EnabledEnabled
Enabled
• Disabled
Status field indicating if Auto-negotiation for the Ethernet port is enabled as deter-
mined by the Interface Type setting.
Remote Fault: [swEtherTransCfgRe-
moteFault]
•Enabled
•
••
• Disabled
DisabledDisabled
Disabled
Modifiable only is Auto-negotiation is enabled. Enables/disables remote fault report-
ing.
Pause: [swEtherTransCfPause] •
••
•Enabled
EnabledEnabled
Enabled
• Disabled
Modifiable only is Auto-negotiation is enabled. Enables pause operation for full
duplex link or disables pause operation.
100BASE-TX full-duplex: [swEtherTransCfg100Bas
eTXFullDuplex]
•
••
•Enabled
EnabledEnabled
Enabled
• Disabled
Modifiable only is Auto-negotiation is enabled. Enables 100Base-TX full duplex for
DTE capability.
100BASE-TX: [swEtherTransCfg100Bas
eTX]
•
••
•Enabled
EnabledEnabled
Enabled
• Disabled
Modifiable only is Auto-negotiation is enabled. Enables 100Base-TX f for DTE capa-
blility.
10BASE-T full-duplex: [swEtherTransCfg10Base
TFullDuplex]
•
••
•Enabled
EnabledEnabled
Enabled
• Disabled
Modifiable only is Auto-negotiation is enabled. Enables 10Base-T full duplex for DTE
capability.
10BASE-T: [swEtherTransCfg10Base
T]
•
••
•Enabled
EnabledEnabled
Enabled
• Disabled
Modifiable only is Auto-negotiation is enabled. Enables 10Base-T for DTE capability.
Field Name MIB
Settings (default in
bold)