User's Guide

76
ADP Mode [swRFBasePortADP-
Mode]
Auto Acceptance
Applies only if ADP is enabled. Auto Acceptance means the base station automati-
cally accepts sub stations. Manual Acceptance means you must manually accept the
sub stations (see “1.2.3.1.4 ADP Substation Configuration” on page 81).
ADP Timeout Interval -
seconds
[swRFBasePortADPTO] 60
Applies only if ADP is enabled. Determines how often (in seconds) the base stations
sends an ADP broadcast.
Record Type: [swRFBasePortType] • Invalid
• Valid
Indicates the status of this base port configuration. If valid, this base port configura-
tion is enabled. If invalid, this port is removed as a base port after the next reset.
Field Name MIB
Settings (default in
bold)