User's Guide

48
Connecting Cabling
The SkyWay connects to the antenna by means of a LMR-400 RF cable.
The SkyWay connects to power and to the terminal, terminal emulator or LAN by
means of three cables:
•power
•console
• data (Ethernet copper or fiber)
The three cables route into the building.
Routing Connected Cables
Before you begin connecting the SkyWay, consider where the cables should be routed.
within the building. SkyWay’s design enables you to route each cable to its most logi-
cal/convenient location. These locations may not be in the same room or even on the
same floor. For example, it may make the most sense to route the power to a utility
room on the top floor, the console to a secured room on the second floor, and the
Ethernet to your LAN room on the first floor:
The length of the cables you ordered determines the maximum distance for each
connection.Be sure to secure the cables to the mast at intervals to protect the cables
and the connection.
www.solectek.com
Utility Room for Power
Utility Room for PowerUtility Room for Power
Utility Room for Power
Secured Room for Console
Secured Room for ConsoleSecured Room for Console
Secured Room for Console
LAN
LANLAN
LAN
room
roomroom
room
SkyWay
SkyWaySkyWay
SkyWay
mount
mountmount
mount