User's Guide

42
Mounting the SkyWay Unit
Mount The SkyWay Bridge/Router to an outdoor mast or wall.
Mounting to a Mast
To o l s :
To o l s :To o l s :
To o l s :
• 13 mm hex socket wrench
• Slotted screwdriver
To m o u n t t h e
SkyWay to a mast:
1. Place the mast-mounting bracket on a table with the flat side down.
Use the third central pair
of slots for seating a third
clamp if you want extra
clamp security.
2. Thread two clamps into the outside pair of slots on the bracket. Make sure to
thread them in the same direction.
3. Place the SkyWay face down. Place the bracket and clamp assembly over the rear
of the SkyWay so that the four mounting holes align.
4. Place one spring lock washer (P/N 1225201) on each mounting bolt.
5. Using a 13 mm hex socket wrench, tighten a bolt and washer into each hole of the
bracket to a maximum torque of 15-20 ft-lbs (to prevent stripping).
P/N 1225001
P/N 1225001P/N 1225001
P/N 1225001
P/N 1225501
P/N 1225501P/N 1225501
P/N 1225501
P/N 1225401
P/N 1225401P/N 1225401
P/N 1225401
P/N 1225201
P/N 1225201P/N 1225201
P/N 1225201