User's Guide

7002901: 12 dBi 110 ° Outdoor Sectorial Antenna
227
Wall Mount
Note. Since the antenna must be mounted above the SkyWay, do not use the wall
mount if the SkyWay is mounted on a mast.
1. Prepare the wall as necessary (e.g., measure and drill holes, set screw anchors).
2. Attach the two mounting brackets to anchor the frame at top and bottom.
3. Insert and tighten two screws through pre-drilled mounting holes.
Mast Mount
1. Attach the two mounting brackets to anchor the frame at top and bottom.
2. Attach the antenna to the mast with two hose clamps seated in grooves on the
brackets.
3. Tighten the clamps.
Wind loading @ 140 mph 6.6 lbs (2.99 kg)
Elevation adjustment n/a
Size 20 in x 2 in x 1.2 in
(508 mm x 50.8 mm x 30.48 mm)
Weight 0.55 lbs (.25 kg)
Radome ASA, UV stabilized
Reflector material Powder-coated aluminum
Mounting hardware stainless steel worm-type clamp
Mast diameter .75 in to 3.0 in (19.05 mm to
76.2 mm) OD pipe
Specifications (Continued)