User's Guide

Bridging Screens
154
Checking Spanning Tree Port Status
Use screen 2.3.3 Spanning Tree Port Status to check if a port is enabled for Spanning
Tree and other statistics. To see the status of each port, press .N for the next port.
2.3.3 Spanning Tree Port Status
Field Name MIB Comments
Port Number
The physical port number or base sub port (sub station) number. On a sub station,
the bridge ports are 2 and 3. On a base station, the bridge ports are 2 and the sub
station numbers.
Port State Forwarding
The current state of this bridge port.
Port Status Enabled
Whether this port is configured for bridging (enabled).
Port Path Cost [dot1dStpPortPathCost]
The contribution to the path cost towards the Spanning Tree root which includes
this port.
2.3.3. Spanning Tree Port Status Record 1 of 1
Port Number : 2
Port State : Forwarding
Port Status : Enabled
Port Path Cost : 10
Designated Root ID : 4241 00:ba:d0:ba:be:00
Designated Cost : 0
Designated Bridge : 4241 00:ba:d0:ba:be:00
Designated Port : 0002
Port Forward Transitions : 1
\ - return to menu . - commands TAB - next available field ENTER - edit