User's Guide

Port Status and Control Screens
135
Multiple Collision Frames [dot3StatsMultipleCollisio
nFrames]
The number of successfully transmitted frames on a particular interface for which
transmission is inhibited by more than one collision.
SQE Test Errors [dot3StatsSQETestErrors]
The number of times that the SQE TEST ERROR message is generated by the PLS
sublayer for a particular interface.
Deferred Transmissions [dot3StatsDeferredTrans
missions]
The number of frames which experience a delay for the first transmission attempt
on a particular interface because the medium is busy.
Late Collisions [dot3StatsLateCollisions]
The number of times a collision is detected on a particular interface later than 512
bit-times into the transmission of a packet.
Excessive Collisions [dot3StatsExcessiveCollisi
ons]
The number of frames which could not be transmitted on a particular interface due
to excessive collisions.
Internal MAC Transmit
Errors
[dot3StatsInternalMacTran
smitErrors]
The number of frames which could not be transmitted on a particular interface due
to an internal MAC sublayer transmit error.
Carrier Sense Lost [dot3StatsCarrierSenseEr
rors]
The number of times that the carrier sense condition was lost or never asserted
when attempting to transmit a frame on a particular interface.
Frames Too Long [dot3StatsFrameTooLongs
]
The number of frames received on a particular interface that exceed the maximum
permitted frame size.
Internal MAC Receive
Errors
[dot3StatsInternalMacRec
eiveErrors]
The number of frames for which reception on a particular interface fails due to an
internal MAC sublayer receive error.
Field Name MIB 2