User's Guide

System Status and Control Screens
127
System Status and Control Screens
System status includes an overview of the system and SNMP Statistics.
Taking a System Snap Shot
You can access the 2.1.1 General Status and Control screen to view you system’s
hardware configuration. You can also use this screen to change the Watchdog timer,
which is the only configurable field on this screen.
Note If you are accessing this screen using an SNMP Manager, you cannot change the
Watchdog timer.
2.1.1 General Status and Control
2.1.1. General Status and Control *
Product Code : Skyway Bridge
Serial Number : 12
Board Revision : Version 1
Software Version : Version 1.0
Media Type : Twisted Pair
RF Power Type : High Power
County Code : United States
Antenna Type : No antenna
DRAM Size : 32 Mb
DRAM Usage (bytes) : 4258216
FLASH Size : 8 Mb
FLASH Usage (bytes) : 2589520
VCO type : Package
Operational for : 22000
Last Failure Reason : No crash dump
Watchdog Timeout : 200010 0 - watchdog timer off
each unit is 1.5ms
\ - return to menu . - commands TAB - next available field ENTER - edit