User's Guide

Diagnostics
107
4.2 RF Sub Radio Test
The following lists the field name, the MIB name, and the default setting:
Te r m i n a t e Te s t Ends the currently run-
ning test.
Number of Frames or
Bursts
[swRFBaseTestFrames] 0
The number of frames or bursts to transmit when running the Continuous Single
Frame Transmit test.
Frame Length or Maxi-
mum Burst Size
[swRFBaseTestFrame-
Length]
1530
The frame length to transmit when running the Continuous Single Frame Transmit
test. The range is 3 to 3200.
Field Name MIB
Settings (default in
bold)
RF Port Number [swRFSubTestIndex] 3
The RF Port number is 3.
Field Name MIB
Settings (default in
bold)
4.2 RF Sub Radio Test
** Note - diagnostic driver must be installed **
RF Port Number : 3
Test To Run : Terminate Test
\ - return to menu . - commands TAB - next available field ENTER - edit