User's Guide

100
1.5 Configuration Summary
The system configuration area describes the current settings for the system and ports.
Port 1 displays the serial port settings, including type, baud rate, data bits, parity, and
stop bits. Port 2 displays the Ethernet port settings, including the MAC address for the
port, Interface Type, and configuration status. Port 3 displays the RF port settings,
including the Port Type, MAC address for the port, data rate, and configuration status.
Bridge Configuration displays Bridging and Spanning Tree status (enabled or disabled)
and number of currently configured bridge ports.
Press .N to see the next page:
1.5. Configuration Summary
System Configuration:
---------------------
System Description Solectek Corporation SkyWay
System Date & Time 18 Jan 2000 20:35:01
Port - 1 RS-422 115200 8 NONE One
Port - 2 Ethernet 802.3 00:ba:d0:ba:be:00
Auto Negotiation On-line
Port - 3 RF Base Port 00:00:c4:1c:91:45
2 Mbps On-line
Bridge Configuration:
---------------------
Bridging Enabled
Spanning Tree Enabled
Number of Bridge Ports 1
\ - return to menu . - commands TAB - next available field ENTER - edit
1.5. Configuration Summary
Router Configuration:
---------------------
IP Routing Enabled
IP Port Configuration
Port 2 104.100.002.001 255.255.000.000
Port 3 104.099.001.001 255.255.000.000
RF Configuration:
-----------------
Number of Substations 0
RF Frequency 2468 Mhz
\ - return to menu . - commands TAB - next available field ENTER - edit