User's Guide

IP Routing
97
Setting up Static Routing
Set up IP static routes in 1.4.3 IP Static Routes Configuration, described in detail on
page 97.
Note For more information about IP Static Routes, see Static Routing is the Best Choice for
Service Providers, a white paper published by Solectek.
1.4.3 IP Static Routes Configuration
Field Name MIB
Settings (defaults in
bold)
Network Address [swIpRouteNetAddr]
The destination IP address.
Network Mask [swIpRouteNetMask]
The destination network subnet mask.
Gateway Address [swIpRouteGateway]
The IP address of the gateway to use as the next hop.
Prt [swIpRouteIndex] 3
The physical port number that is used to reach the gateway address.
1.4.3. IP Static Routes Configuration * Record 0 of 0
Rte Over Record
Network Address Network Mask Gateway Address Prt Cost Ride Type
--------------- --------------- --------------- --- ---- ---- ------
200.100.100.000 255.255.255.000 196.028.145.069 3 2 True Valid
\ - return to menu . - commands TAB - next available field ENTER - edit