User's Guide

92
1.3.2 Bridge Port Configuration
Use this screen to configure the port for bridging.The following table lists the field
name, the MIB name, and the default setting:
Field Name MIB
Settings (default in
bold)
Port Number [swBridgePortIndex]
This is the port number used as a bridging port.
Bridging State [swBridgePortBridging-
State]
•Enabled
• Disabled
Specify if bridging is enabled or disabled for this port. This controls the port’s bridg-
ing operation if Spanning Tree is disabled.
STP State [swBridgePortSTPState] • Disabled
• Blocking
•Listening
•Learning
•Forwarding
This is a status field which tells you the current state for this port. For example, in the
screen above, both ports are in the Forwarding state.
STP Port Cost [swBridgePortSTPCost]
Determines the cost of the path to the root through this port.
1.3.2. Bridge Port Configuration Record 1 of 1
Port Bridging STP STP Port
Number State State Cost
------ -------- -------- --------
2 Enabled Forwarding 10
256 Enabled Forwarding 100
\ - return to menu . - commands TAB - next available field ENTER - edit