User's Guide

74
1.2.3.1.1 RF Base Port Configuration
The following table lists the field name, MIB, and settings with the default setting in
bold. If only one setting is shown, it is the default:
Receive Buffers [swRFDiagPortRecvDesc] 180
The number of receive buffers.
Maximum Frame Size [swRFDiagPortmax-
FrameSize]
3200
The physical MTU, or largest frame that can be transmitted. This field is not config-
urable.
Record Type [swRFDiagPort] • Valid
• Invalid
The status of this configuration.
Field Name MIB
Settings (default in
bold)
Port Number [swRFBasePortIndex] 3
The RF port number.
Field Name MIB
Settings (default in
bold)
1.2.3.1.1 RF Base Port Configuration Record 1 of 1
Port Number : 3
Configuration Status : Off-line
Port Type : RF-DLC Base Port
Max Buffers : 800
Transmit Buffers : 240
Receive Buffers : 180
Maximum Frame Size : 3200
Slow Polling Timeout-seconds : 15
First Sub Station Number : 256
Last Sub Station Number : 287
Automatic Discovery Protocol : Enabled
ADP Mode : Auto Acceptance
ADP Timeout Interval-seconds : 60
Record Type : Valid
\ - return to menu . - commands TAB - next available field ENTER - edit