User Manual
Table Of Contents
Step 6. Tighten the fastening head and into insert the corresponding
positive and negative (PV-/PV+) ports of the inverter.
The following is the location of the inverter's positive and negative
(PV-/PV+) ports.
Note: Before inserting the PV terminal, please turn on the switch of
the PV module and use a multimeter to measure the positive and
negative poles of the PV terminal port to prevent reverse
connection.
Schematic diagram of the inverter PV connected.
Crimping Tool
PV+
PV-
Negative terminal
Positive terminal
Positive terminal
Negative terminal
Electrical Connections
Electrical Connections
34 35
PV 2+
PV1+
PV1-
PV1-
PV 2-
PV1+
Multimeter
DC Voltage
Range ≥1100 V DC
D
o
n
g
l
e
/
U
p
g
r
a
d
e
D
o
n
g
l
e
/
U
p
g
r
a
d
e
Step 5. The PV joint is divided into 2 parts - the plug and the fastening
head. Insert the cable through the fastening head and the opposite
plug. Note that the red and black lines correspond to differentof
plugs. Finally, force the cable pair into the plug, will a "click" sound
,which indicates that the connection is complete.
Step 4. Tighten the PV pin needle and the wiring harness to make the
connection tight without looseness.