User Manual
Table Of Contents
- Dear Customer
- Table of Content
- 1. Features
- Control Panel
- Flip-up Armrests
- Tiller Height Adjustment
- Tiller Angle Adjustment
- Backrest Storage Pocket
- Anti-tip Wheels
- Freewheel Lever
- Seat Back
- Headlight
- Seat Base
- Seat Supporting Frame
- Front Cover
- Manual Fold Release Lever
- Battery Pack
- Product images may vary and will be subject to real products received.
- 1.1 Main characteristics
- 2. Product Specifications and Relevant Parameters
- 3. Main Parts and Relevant Function
- 4. Electric Folding and Unfolding
- 5 Manual Folding & Unfolding
- 6 Safety Requirements
- 7 Battery and Battery Charging
- 7.1 Battery charging guide
- 7.2 Guide to a safe and long-lasting battery
- 7.2.1 How does the charger work?
- 7.2.2 How does the indicator light (LED) in charger display.
- 7.2.3 Can I use other chargers with my Solax scooter?
- 7.2.4 How often should charge the battery?
- 7.2.5 How to achieve optimum operating distance?
- 7.2.6 Why does the power of my new battery seem weak?
- 7.2.7 How to ensure the battery life?
- 8 Enc Information
- 9. Basic Troubleshooting
- 10 Maintenance
Issue 2020-03 REV1 11
7 Battery and Battery Charging
This scooter is designed with a maintenance free, high quality Li-polymer (Lithium) battery. Please follow the below
instructions to ensure a long-lasting battery life.
• Charge the battery before the first operation.
• Avoid your battery to go flat/fully use its charge as this will damage the battery
• If you know that you will not be using your scooter for a long period of time, you can follow the below instructions to
prevent severe damage
1. Fully charge the battery
2. Remove battery from scooter
3. Store the battery and scooter in a cool and dry place with steady temperature and temperatures that do not exceed
25’C or under 10’C
7.1 Battery charging guide
You can charge your Solax Charge in the folded or unfolded position. The Charging Socket is in the center of your
scooters dash. Please see image below.
1. Ensure your scooter is turned off (Set key to “off” position)
2. Open the protective rubber tab
3. Plug the charger into a functioning power socket or extension lead cable
4. Plug the specialized Plug into the socket on your scooters dash, ensuring the pins are lined up correctly
5. The light on the battery charging unit will change depending on battery status. Red & Orange light indicates
power on, and charging and green light means fully charged
6. Turn off the power switch first when the battery is fully charged. Then take out the DC charging connector before
you take out the AC input power socket.
7. If the red light is off when the power on, please check whether the power plug is properly inserted.
8. Normally allows 8-14 hours for charging.
Turn the key to “off”
Insert charging plug into charging socket
Warning: Ensure the pins are matched properly.
Note: The scooter has a self-locking function to prevent driving when you charge the battery.