Issue 2020-03 REV1 1
Dear Customer Congratulations on your purchase and thank you for choosing the Solax Charge Soft-tail! Please read this manual carefully before operating your mobility scooter. By doing so you can ensure that you are familiar with all the components of your new scooter and are able to use it safely in a range of different situations. If you still have questions after reading this manual, please contact the seller for further information.
Table of Content 1. FEATURES 4 1.1 MAIN CHARACTERISTICS 5 2. PRODUCT SPECIFICATIONS AND RELEVANT PARAMETERS 6 3. MAIN PARTS AND RELEVANT FUNCTION 7 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 4. KEY IGNITION SPEED ADJUSTMENT DIAL POWER INDICATOR DIRECTION CONTROL LEVER HORN BUTTON HEADLIGHT TELESCOPIC TILLER CONTROLLER FREEWHEEL LEVER MOTOR/TRANSMISSION COMPONENT 7 7 8 8 8 8 8 9 9 9 ELECTRIC FOLDING AND UNFOLDING 9 4.1 AUTOMATIC FOLDING AND UNFOLDING SCOOTERS USER THE REMOTE CONTROL 4.
1. Features Please refer to the diagram below to identify the different components of your scooter. Familiarise yourself with the terminology to better understand part references throughout the Owner’s Manual.
1.1 Main characteristics The Charger is packed with innovative modern design features. It is safe, comfortable, easy to operate, convenient to be folded and carried, lightweight and steady. 1. The frame is made of a lightweight aluminum alloy 2. It can be folded and unfolded without any tools or effort. It has 2 automatic folding functions and a manual safety fold override. 3. A higher, more substantial backrest allows for more comfort during your rider. The backrest can be folded down for easier transport.
2. Product Specifications and Relevant Parameters Model Solax Charge (S302521) Maximum Product Size 950mm x 450mm x 865mm Product Minimum Size 450mm x 450mm x 635mm Seat Above Ground 530mm Seat Width 380mm Backrest Height 310mm Product weight (excluding battery) 23.6kg Maximum Weight Capacity 125kg Travel Distance 15km Fastest Speed 6km/h Turning Radius ≤1.
3. Main Parts and Relevant Function 3.1 Control Panel/Dash - Fig.01 USB mobile phone charging port The Dash is the “control-center” of your Solax Charge. It offers access to all the features and controls. It features • Light switch • Horn • Key Ignition • Charge Socket • USB Charger • Speed adjustment dial • Fold/unfold button • LCD Display • Forward and Reverse Levers Fig. 01 Notice: Do not put the control panel in the humid area.
3.4 Power Indicator (Fig.04) When the scooter is turned to the “on” position, your battery charge will show on the LCD display. As you use your scooter and your battery, the lights will snuff out, starting with the bars on the righthand side. 3.5 Direction Control Lever The direction control lever is used to control the forward and backward. ● Move the lever with your right hand to drive forward. (Fig.05) Fig.05 ● Move the lever with your left hand to move backward. (Fig.
3.9 Controller The Controller is fixed in the rear cover and it receives the signal from the control panel and transfers the signal to motor, brake, and bulb. You should not remove the cover yourself any work on the controller needs to be carried out by a fully trained technician or you may void your warranty. Notice: Do not store the controller in the moisture environment. If the controller has been affected by moisture, make sure to dry it before operation. 3.
4.2 Automatic folding and unfolding buttons on the control panel: Unfold Fold Notice: Ensure your scooter is on level ground, before using the fold/unfold function of your Solax Charge 5 Manual Folding & Unfolding 5.1 Manual Folding 1. Place the scooter on a level ground and use your hand to lift the red bar located under the seat 2. After manually lifting the bar you will notice the scooters front and rear wheels coming together.
6 Safety Requirements 6.1 Driving Surface and Tips The Solax Travel scooter range has been designed to be used on paved surfaces, such as carpet, well maintained footpath, shopping centers etc. However, it may also be used on other surfaces, such as grass or walkways in parks etc. However, there are some things that need to be considered to ensure a safe and comfortable ride.
7 Battery and Battery Charging This scooter is designed with a maintenance free, high quality Li-polymer (Lithium) battery. Please follow the below instructions to ensure a long-lasting battery life. • • • Charge the battery before the first operation. Avoid your battery to go flat/fully use its charge as this will damage the battery If you know that you will not be using your scooter for a long period of time, you can follow the below instructions to prevent severe damage 1. Fully charge the battery 2.
7.2 Guide to a safe and long-lasting battery 7.2.1 How does the charger work? When the battery voltage is low, the battery charger outputs a large current to charge the • battery. • When battery voltage is close to full, the battery charger outputs a small current, this is known as a trickle feed. When battery is full, the battery charger will output very little current which is almost zero. • Therefore. • The battery will continually charge after connecting the charge but will not overcharge.
Please follow these steps to improve the battery performance 1. Fully charge the battery before first use 2. Use a low speed setting for the first use and do not travel too far until you are familiar with the operation of your scooter. 3. Try to use as much battery as possible, before giving it a second full charge. This will make the battery operate at up to 90% capacity. 4. The battery capacity will reach 100% after four to five charging and discharging cycles as outlined above. 7.2.
8 Enc I nform ation This device complies with Medical EMC Standard IEC 60601-1-2:2014. 8.
8. 2 Guidance and manufacturer's declaration - electromagnetic immunity The 4-Wheel Folding Scooter is intended for use in the electromagnetic environment specified below. The customer or the user of the 4-Wheel Folding Scooter should assure that it is used in such an environment.
8.3 Guidance and manufacturer's declaration - electromagnetic immunity The 4-Wheel Folding Scooter is intended for use in the electromagnetic environment specified below. The customer or the user of the 4-Wheel Folding Scooter should assure that it is used in such an environment.
8.4 portable and mobile RF communications equipment and the 4-Wheel Folding Scooter Recommended separation distances between portable and mobile RF communications equipment and the 4-Wheel Folding Scooter The 4-Wheel Folding Scooter is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
9. Basic Troubleshooting 9.1 Scooter not turning on • • • • Please check the key is inserted into the switch and turned to the on position Check it if the battery is fully charged, if not charge the battery until the charger light turns green If the battery capacity is insufficient, please increase the charging time/cycles. If the issue continues, then battery may need testing. Please contact the sellers store 9.
Warranty Registration Card Purchase by Contact No. Email Address Shipping Address Model Solax Charge S3025 Serial No. Purchasing Date Warranty Period Y M D 12 months warranty from purchasing date Manufacturer Solax Technology Limited Importer Name of reseller / Purchasing Store Please complete your Warranty registration card and email through a copy to sales@wholesalemobility.com.
The following symbols are found on the Scooter: .I Warning of Microwave Radiation Manufacturer Do not drive in rain or snowy weather 2J Date of Manufacture keep loose clothing clear of the scooter Refer to The Instruction Manual [:r;::ill] Do not operate cell phones while the scooter is powered on. Medical Device Serial Number IREFI Catalogue Number ILOTI Lot Number Warning . Beware of potential hazard Warning.
