User Manual

Table Of Contents

Plug the Pocket LAN into the correct

port of inverter.

Note that the direction of the

buckle needs to be consistent.

Pocket LAN V3.0

User Manual

Read this user manual carefully prior to use.

1. INSTALLATION

Ensure all power has been turned off

at least 5 minutes prior to installation.

Screw off two components on the Pocket

LAN, insert the Internet cable and then

make an RJ45 connector for the cable.

Tighten those components.

Remove the cover of DONGLE port at

the bottom of the inverter. Ready to

install your Pocket LAN.

Connect the other side of the network

cable to home router. And make sure the

home router works in good condition.

Internet

www.solaxpower.com

Router

PAGE 1
. INSTALLATION Ensure all power has been turned off at least 5 minutes prior to installation. Remove the cover of DONGLE port at the bottom of the inverter. Ready to install your Pocket LAN. Plug the Pocket LAN into the correct port of inverter. Connect the other side of the network cable to home router. And make sure the home router works in good condition. Screw off two components on the Pocket LAN, insert the Internet cable and then make an RJ45 connector for the cable. Tighten those components.
PAGE 2
. MONITORING SolaxCloud Registration Step 1: Use your smart phone to scan below QR code or search for the keyword “SolaxCloud” in browser to download the Monitoring App. Monitoring Website Step 1: Ensure that your computer or laptop is connected to a network. Step 2: Open a browser and enter www.solaxcloud.com/ Step 3: Select your display language and read the User guide, then create a new account. APPEARANCE AND DIMENSIONS Prior to installation, ensure all power going to the inverter has been cut off.