Specifications Sheet

SW-01-7510US 16ɴɳɳɺ
All units provided are imperial. SI units provided in parentheses.
SolarWorld AG reserves the right to make specification changes without notice.
Module current [A]
Module voltage [V]
1000 W/m²
800 W/m²
600 W/m²
400 W/m²
200 W/m²
100 W/m²
ISC
V
OC
COMPONENT MATERIALS
Cells per module 60 Front
Low-iron tempered glass
with ARC (EN 12150)
Cell type
Monocrystalline
5-busbar
Frame Clear anodized aluminum
Cell dimensions
6.17 in x 6.17 in
(156.75 x 156.75 mm)
Weight 39.7 lbs (18.0 kg)
SW 285 SW 290 SW 295 SW 300
Maximum power P
max
285 Wp 290 Wp 295 Wp 300 Wp
Open circuit voltage V
oc
39.7 V 39.9 V 40.0 V 40.1 V
Maximum power point voltage V
mpp
31.3 V 31.4 V 31.5 V 31.6 V
Short circuit current I
sc
9.84 A 9.97 A 10.10 A 10.23 A
Maximum power point current I
mpp
9.20 A 9.33 A 9.45 A 9.57 A
Module efficiency
m
17.00 % 17.30 % 17.59 % 17.89 %
*STC: 1000W/m², 25 °C, AM 1.5
PERFORMANCE AT 800 W/M
2
, NOCT, AM 1.5
SW 285 SW 290 SW 295 SW 300
Maximum power P
max
213.1 Wp 217.1 Wp 220.5 Wp 224.1 Wp
Open circuit voltage V
oc
36.4 V 36.6 V 36.7 V 36.9 V
Maximum power point voltage V
mpp
28.7 V 28.8 V 28.9 V 31.1 V
Short circuit current I
sc
7.96 A 8.06 A 8.17 A 8.27 A
Maximum power point current I
mpp
7.43 A 7.54 A 7.64 A 7.75 A
Minor reduction in efficiency under partial load conditions at 25 °C: at 200 W/m
2
, 100% of the STC efficiency (1000 W/m
2
) is achieved.
THERMAL CHARACTERISTICS
NOCT 46 ˚C
TCI
sc
0.04 % / ˚C
TCV
oc
-0.30 % / ˚C
TCP
mpp
-0.41 % / ˚C
Operating temp -40 to +85 °C
ADDITIONAL DATA
Power sorting -0 Wp/+5 Wp
J-Box IP65
Connector
PV wire per UL4703
with H4/UTX connectors
Module fire performance (UL 1703) Type 1
PARAMETERS FOR OPTIMAL SYSTEM INTEGRATION
Maximum system voltage SC II / NEC 1000 V
Maximum reverse current 25 A
Number of bypass diodes 3
Design loads* Two rail system 113 psf downward, 64 psf upward
Design loads* Three rail system 178 psf downward, 64 psf upward
Design loads* Edge mounting 178 psf downward, 41 psf upward
* Please refer to the Sunmodule installation instructions for the details associated with these load cases.
• Compatible with both "Top-Down"
and "Bottom" mounting methods
• Grounding Locations:
– 4 locations along the length of the
module in the extended flange.
1.14 (29)
0.43 (11)
1.30 (33)
SW 285-300 MONO
PERFORMANCE UNDER ST
ANDARD TEST CONDITIONS (STC)*
+-
65.95 (1675)
39.4 (1001)
∅ 0.35 (9)
39.37 (1000)
4x
37.8 (961)
7.12
(180.85)
4.20
(106.65)
11.32
(287.50)
43.30 (1100)
1.30 (33)
∅ 0.26 (6.6)
∅ 0.35 (9)