Cut Sheet

Included components
SW-01-5148US 06-2012
Inverter operating
temperature ranges
-40 C to 65 C (-40 F to 149 F) Micro inverters
-25 C to 45 C (-13 F to 113 F) String inverters
(String inverters can be located in a temperature controlled environment; e.g., a garage)
Sunfix plus loading guide: Calculations based on sloped roofs 9 to 63 degrees, seismic design category E, basic wind exposure C (zone 1, 2, and 3)
Composition Tile roof
Roof pitch (degrees) Max ground snow load (lbs/ft
2
) Max wind speed (MPH) Max ground snow load(lbs/ft
2
) Max wind speed (MPH)
9 - 27 50 110 50 110
27 - 45 40 120 40 120
45 - 63 50 130 50 140
Structural security and safety is ultimately the responsibility of the installing party. Installations should be performed by trained and licensed
professionals.
SITE RESTRICTIONS MAY APPLY
Micro inverter solutions String inverter solutions
System item number EC0713 EC0714 EC0715 EC0716 EC0717 EC0718 EC0719
Sunmodule 255 W Mono 4 6 8 12 20 12 24
Module warranty 5-year workmanship plus 25-year linear warranty
Inverter Micro inverters String inverters
Inverter accessories AC trunk cables, sealing caps, terminators and inverter mounting Included DC disconnect and
rated PV cables
Inverter warranty 25-year warranty 10-year warranty
Performance monitoring
Envoy communications gateway Suntrol Data Logger
Lifetime online monitoring
Sunfix Plus mounting Penetrations with included flashing, rails, module mounting, and all required hardware
Sunfix Plus warranty 10-year limited warranty
Electrical equipment All equipment grounding and bonding components, cable management, and DC junction boxes
Electrical drawing 3-line, with system labels 1-line with system labels
Racking standard layout
drawing
Full layout drawing with recommended optional layouts
Installation guides Sunmodule, Sunfix plus, inverter, and monitoring installation manuals
Black module solutions and alternate Sunfix plus roof penetrations, including flat tile, curved tile, and new
construction, are available with bronzed (black) anodized flashing as well as the standard mill finish.
The pre-engineered Sunkits are
designed with 4 portrait module
building blocks for maximum
versatility with common components
3
.
Due to the high versatility of the
Sunfix plus mounting solution,
alternate layouts are possible. The
most common layout options are
included in the standard racking
layout provided.
3
EC0714, the six-module system, is comprised of two 3-module building blocks.
SUNMODULE
8.25” MIN.
16.5” MAX.
(TYP.)
SUNFIX PLUS RAIL
QUICK MOUNT COMP
ROOF PENETRATION
SUNFIX PLUS
L-BRACKET
13’-3”
4’ TYP.
5’- 6”