Installation Instructions

Sunrise
Solartech
Co.,
Ltd
Tel:[phone] Fax:[phone]
Website:www.srsolartech.cn
ADD: No.65-22 Xinggang Road, ZhongLou Development Zone, Changzhou 213023 Jiangsu, P.R.China
6
/11
When installing module on a roof, ensure that the roof construction is suitable. In addition, any
roof penetration required to mount the module must be properly sealed to prevent leaks.
In some cases, a special support frame may be necessary.
The roof installation of solar modules may affect the fireproofing of the house construction.
The modules are rated fire Class C, and are suitable for mounting over a class A roof. Do not
install modules on a roof or building during strong winds in case of accidents.
Mechanical Installation
Pole mount
When installing a module on a pole, choose a pole and module mounting structure that will
withstand anticipated winds for the area.
General installation
Module mounting must use the pre-drilled mounting holes in the frame.
The most common mounting is achieved by mounting the module using the four symmetry
points close to the inner side on module frames.
If excessive wind or snow loads are expected, all eight mounting holes must be used
Do not lift the module by grasping the module’s junction box or electrical leads.
Do not stand or step on module.