Installation Instructions

Sunrise
Solartech
Co.,
Ltd
Tel:[phone] Fax:[phone]
Website:www.srsolartech.cn
ADD: No.65-22 Xinggang Road, ZhongLou Development Zone, Changzhou 213023 Jiangsu, P.R.China
3
/11
Do not apply paint or adhesive to module top surface.
Do not use mirrors or other magnifiers to artificially concentrate sunlight on the modules. Do
not expose back sheet foils directly
to
sunlight.
When installing the system, abide with all local, regional and national statutory regulations.
Obtain a building permit where necessary.
Safety precaution for installing a solar photovoltaic system
Solar modules produce electrical energy when light shines on their front surface. The DC
voltage may exceed 30V. If modules are connected in series, the total voltage is equal to the sum
of the individual module voltages. If modules are connected in parallel, the total current is equal
to the sum of individual module currents.
Keep children well away from the system while transporting and installing mechanical and
electrical components.
Completely cover the module with an opaque material during installation to keep electricity
from being generated.
Do not wear metallic rings, watchbands, ear, nose, lip rings or other metallic devices while
installing or troubleshooting photovoltaic systems.
Use only insulated tools that are approved for working on electrical installations.
Abide with the safety regulations for all other components used in the system, including wiring
and cables, connectors, charging regulators, inverters, storage batteries and rechargeable
batteries, etc.
Use only equipment, connectors, wiring and support frames suitable for a solar electric system.
Always use the same type of module within a particular photovoltaic system.
The electrical characteristics are within
± 10 percent of the indicated values of Isc, Voc, and