Technical Specifications

◌

Grid Tied www.mouliengg.com ; 612-424-5176; Manual version 16.0

U.S. Patent No. 8,716,889

The Line

diagram to the

left is when the

utility requires a

bidirectional

meter installed.

Typically this is

required by the

utility when the

utility gives

solar rebates and

does not wish to

install a

production

meter for the

renewable

energy credits.

Panel brand used is only for illustrative purposes for the line diagram.

Run #6 ground wire through each inverter and frame (lug nuts provided) and use a ground rod

appropriately distanced from the original. Ensure the ground wires are well connected in each of the

inverter.

Multiple SolarPod

◌TM

Grid Tied wiring: Four SolarPod

◌TM

Grid Tied can be wired in series to one

dedicated 20A two pole circuit breaker. Each SolarPod

◌TM

Grid Tied comes with male receptacle on one

end and an end terminator on the other end. Only a female receptacle can be placed instead of the end

terminator. Please see below diagram to understand the serial male/female receptacle connections.