Installation manual

9
Safety, Installation, and Operations Manual
© Solaria Corporation All rights reserved. Contents subject to change without notice 8-26-19
Power Unlocked by Design
NOTES
When installing the Enphase Q Cable and accessories, adhere to the following:
• Do not expose the terminator cap or cable connections to directed, pressurized liquid (water jets, etc.).
• Do not expose the terminator or cable to continuous immersion.
• Do not expose the terminator cap or cable connections to continuous tension (e.g., tension due to
pulling or bending the cable near the connection).
• Use only the connectors provided.
• Do not allow contamination or debris in the connectors.
• Use the terminator cap and cable connections only when all parts are present and intact.
• Do not install or use in potentially explosive environments.
• Do not allow the terminator to come into contact with open ame.
• Fit the terminator cap using only the prescribed tools and in the prescribed manner.
• Use the terminator to seal the conductor end of the Enphase Q Cable; no other method is allowed.