Installation manual

40
Safety, Installation, and Operations Manual
© Solaria Corporation All rights reserved. Contents subject to change without notice 8-26-19
Power Unlocked by Design
IQ7+ MICROINVERTER PARAMETERS
TOPIC UNIT MIN TYPICAL MAX
Power factor at rated power 1.0
MISCELLANEOUS PARAMETERS
Maximum microinverters per 20 amp (max) AC branch circuit
240 VAC (single phase)
208 VAC (single phase)
13
11
CEC weighted efciency
240 VAC (single phase)
208 VAC (single phase)
%
97.0
96.5
Static MPPT efciency (weighted, ref EN 50530) % 99.5
Total harmonic distortion % 5
Ambient temperature range ºC -40 +65
Night tare loss mW 50
Storage temperature range ºC -40 +85
FEATURES AND SPECIFICATIONS
Dimensions not including mounting bracket (approximate) 219 mm x 191 mm x 37.9 mm
Connector type MC-4 or Amphenol UTX
Weight 1.5 kg (3 lbs.)
Environmental Category / UV Exposure rating Outdoor NEMA 250, type 6 (IP67)
Cooling Natural convection - no fans
Relative humidity range 4% to 100% condensing
Approved for wet locations Yes
Pollution Degree PD3
Maximum altitude 2000 meter (6561 feet)
Communication Power line
Compliance
UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B,
CAN/CSA-C22.2 NO. 107.1-01
Grounding
The DC circuit meets the requirements for ungrounded PV
arrays in NEC. Ground fault protection (GFP) is integrated into
the class II double insulated microinverter.
Monitoring
Enlighten Manager and MyEnlighten monitoring options
require an Enphase IQ Envoy
Integrated DC disconnect
The DC connector has been evaluated and approved for use
as the load-break disconnect required by NEC 690.
Integrated AC disconnect
The AC connector has been evaluated and approved for use
as the load-break disconnect required by NEC 690.