Installation manual

33
Safety, Installation, and Operations Manual
© Solaria Corporation All rights reserved. Contents subject to change without notice 8-26-19
Power Unlocked by Design
Method 1: Clear this Error Using Enlighten
A. Log in to Enlighten and access the system.
B. Click the Events tab. The next screen shows a current “DC Resistance Low - Power Off” condition for the
system.
C. Click DC Resistance Low - Power Off.
D. Where “n” is the number of affected devices, click n devices (show details).
E. Click the serial number of the affected microinverter.
F. Click Reset DC Resistance Low - Power Off Sensor.
The system displays, “A DC Resistance Low- Power Off reset task was issued on [date and time] for this
microinverter and is still pending.”
Method 2: Use Installer Toolkit to Clear the Condition
Follow the instructions in the Enphase IQ Envoy Installation and Operation Manual at enphase.com/support to
clear this condition.
Other Faults
All other faults are reported to the Envoy. Refer to the Enphase IQ Envoy Installation and Operation Manual at
enphase.com/support for troubleshooting procedures.