Installation manual
29
Safety, Installation, and Operations Manual
© Solaria Corporation All rights reserved. Contents subject to change without notice 8-26-19
Power Unlocked by Design
Step 12: Set Up and Activate Monitoring
Refer to the Enphase IQ Envoy Quick Install Guide to install the IQ Envoy and set up system monitoring and grid
management functions. This guide leads you through the following:
y Connecting the Envoy
y Detecting devices and scanning the installation map
y Connecting to Enlighten
y Registering the system
y Building the virtual array
NOTE: When the utility requires a prole other than the default IEEE 1547 (for example grids managed
by Hawaii Electric Industries [HEI] including HECO) you must select an appropriate grid prole for your
installation. You can set the grid prole through Enlighten, during system registration, or through Installer
Toolkit at any time. You must have an Enphase Envoy communications gateway to set or change the grid
prole. For more information on setting or changing the grid prole, refer to the Enphase IQ Envoy Installation
and Operation Manual at enphase.com/support.