Installation manual

25
Safety, Installation, and Operations Manual
© Solaria Corporation All rights reserved. Contents subject to change without notice 8-26-19
Power Unlocked by Design
Step 7: Use the Serial Number Labels to Create the Installation Map
The Enphase Installation Map is a diagram of the physical location of each module in your PV installation. Copy or
use the blank map on page 42 to record module placement for the system or provide your own layout if you require a
larger or more intricate installation map.
Each AC Module, Enphase Envoy, and Enphase Battery have a removable serial number label. Build the installation
map by peeling the serial number labels from the modules and placing the labels on the map. You will also place the
Enphase IQ Envoy (required) and IQ Battery (optional) serial numbers on the map after installation.
After you have created the installation map, use the Enphase Installer Toolkit mobile app to record serial numbers
and congure the system.
For more information, refer to “Detect the Microinverters” in the help topics of the Installer Toolkit app.
A. Remove the label from each module before passing it up to the roof.
Apply the label to the proper position on the installation map.
B. Peel the label from the IQ Envoy (and Enphase IQ Battery, if installed) and afx it to the installation map.
C. Always keep a copy of the installation map for your records.
Afx serial number labels
Label afxed to the side of the Microinverter
Label afxed to the top of the PV
module frame