Installation manual

16
Safety, Installation, and Operations Manual
© Solaria Corporation All rights reserved. Contents subject to change without notice 8-26-19
Power Unlocked by Design
Installing the ACM involves several key steps. Each step listed here is detailed in the following pages.
Step 1: Install an AC Junction Box
Step 2: Position the Enphase Q Cable
Step 3: Connect to AC Junction Box
Step 4: Terminate the Unused End of the Cable
Step 5: Prepare the AC Modules
Step 6: Mount the AC Modules
Step 7: Create the Installation Map
Step 8: Connect the AC Modules
Step 9: Manage the Cabling
Step 10: Ground the system
Step 11: Energize the system
Step 12: Set Up and Activate Monitoring
Solaria PowerXT
®
-R-AC Module Installation